OAB2024 is a rounded acetate optical-frame design with a flatter brow, a defined bridge opening and a 51-20-145 mm catalogue reference, shown in four colours for production planning.
51 – 20 – 145 mm
Lens width · Bridge · Temple length. Catalogue reference, not measured fitting data.
No ready stock. Every order requires production.
Standard MOQ: 500 pairs total per style. Negotiable for the actual design; colour allocation is agreed separately.
All four catalogue colourways are kept together on this page. They show appearance options, not stock availability or guaranteed minimum quantities per colour.
Screen colour and acetate pattern placement may differ from the final sample. Confirm the selected sheet and colour combination through physical approval.
The lower rims are rounded while the top line is comparatively flat. A shaped bridge opening and wide-looking temple sections are visible in the catalogue. The connection image shows a metal component, but its type and tested performance are not specified. C4 is labelled Green and shows a transition from darker green upper areas towards a yellow-toned lower front. If that appearance is required, approve the actual material layout and the finished front rather than relying on the single word Green.
| Model / category | OAB2024 · Acetate optical-frame design |
|---|---|
| Material reference | ACETATE, as labelled in the supplied catalogue. Final sheet reference, construction and material supplier are confirmed for the approved specification. |
| Catalogue dimensions | 51 – 20 – 145 mm · lens width / bridge / temple length |
| Colour references | C1 Black; C2 Brown; C3 Grey; C4 Green |
| Supply / quantity | Made to order. No ready stock. Standard MOQ is 500 pairs per style in total, negotiable for the actual design and specification. Colour allocation depends on material and component requirements. |
| Branding discussion | Authorised logo artwork, placement and application method, subject to construction and approved sample. A displayed design does not authorise use of a third party’s trademark. |
| Optical use | Discuss non-prescription demo lenses for the supply specification. Prescription lens selection, edging and fitting require the buyer’s qualified optical provider; this catalogue is not a compatibility or prescription guarantee. |
| Confirm before approval | Total frame width, lens height, weight, hinge and temple-core specification, finish, logo details, packaging and destination-market testing/documentation. These values are not established by the composite image. |
Samples using existing tooling are normally USD 50–200. New designs requiring tooling incur an additional mould fee. New tooling normally takes 20–25 calendar days from drawing approval; any offset against a bulk order is agreed separately. These are general project conditions, not a fixed quotation for this model.
The catalogue shows rounded lower rims with a relatively flat brow, so a simple circular description would miss part of the outline. Use the front photograph and drawing to define the intended shape rather than relying only on a round-frame label.
The supplied image shows a green upper area and a warmer, yellow-toned lower front. Green is the catalogue colour label. Material direction, transition placement and the appearance after shaping should be confirmed with a physical sample.
No. A metal connection is visible, but the catalogue does not name the hinge type, supplier or mechanism. Confirm the proposed component and sample operation separately; do not infer spring action or durability from this photograph.
The catalogue provides a 20 mm bridge reference but not the full bridge contour, contact geometry or complete front dimensions. If fit is important to the brief, include the required drawing and review a physical sample instead of treating the single number as a fitting guarantee.
Compare the raised angular cat-eye corners of OAB2020 at 51-18-145 mm with this flatter-brow rounded design at 51-20-145 mm. The shared lens-width number does not establish identical overall width or fit; confirm drawings and physical samples.
Images are original-pixel crops from the supplied composite catalogue. They are not additional photographs or generated views. Catalogue dimensions and colours are references, not measured fitting data or available inventory.